Peristaltic pump iPump2S-M, drive IP54 variable up to 200 RPM
Kuva voi poiketa alkuperäisestä
- (Klikkaa tästä jos haluat lisätietoja)
-
The iPump2S-M peristaltic pump was built as a pump for rough use with changing pump rates. The drive can be combined with different pump heads for up to 10 channels. The motor speed can be adjusted in the range from 0.1 up to 200 RPM. Depending on the pump head and tubing, flow rates of 0.0001-825 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The setpoints can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.
The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The metal housing is easy to clean and offers IP 54 protection against penetrating splash water and dust. The small dimensions allow space-saving installation.
Flow rate: 0.0001- 825 ml/min
Speed: 0.1-200 RPM
Accuracy: 1 UPM
Pump direction: Forward
Time control: 0,1s-99 h
Display: 3-digit speed display
Interface: RS-485
External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 140×96×96 mm (d*w*h)
Scope of delivery:
Pump drive without head
lisää The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The metal housing is easy to clean and offers IP 54 protection against penetrating splash water and dust. The small dimensions allow space-saving installation.
Flow rate: 0.0001- 825 ml/min
Speed: 0.1-200 RPM
Accuracy: 1 UPM
Pump direction: Forward
Time control: 0,1s-99 h
Display: 3-digit speed display
Interface: RS-485
External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 140×96×96 mm (d*w*h)
Scope of delivery:
Pump drive without head
| (-) Tekninen tieto: | |
|---|---|
| Maksimi pumpattavatilavuus: | 700 ml/min |
| Maximum rotation speed: | 200 upm |
| Virtalähde: | 230 V AC |
| Ulostulosignaalin tyyppi: | analoginen |
| Ulostulosignaalin tyyppi: | RS 485 |
| (-) Compliance information: | |
|---|---|
| WEEE obligation: | Kyllä |
| WEEE registration number: | DE87387371 |
| WEEE brand according to EAR register: | HLL |
| WEEE type of equipment: | Small equipment for use in other than private households only |
Necessary choosen article:
- 106723211
Pump head DG1A, 1 channel, 6 rollers, up to 75 ml/min - 106723212
Pump head DG1B, 1 channel, 10 rollers, up to 54 ml/min - 106723221
Pump head DG2A, 2 channel, 6 rollers, up to 75 ml/min - 106723222
Pump head DG2B, 2 channel, 10 rollers, up to 54 ml/min - 106723241
Pump head DG4A, 4 channel, 6 rollers, up to 75 ml/min - 106723242
Pump head DG4B, 4 channel, 10 rollers, up to 54 ml/min - 106723261
Pump head DG6A, 6 channel, 6 rollers, up to 75 ml/min - 106723262
Pump head DG6B, 6 channel, 10 rollers, up to 54 ml/min - 106723281
Pump head DG8A, 8 channel, 6 rollers, up to 75 ml/min - 106723282
Pump head DG8B, 8 channel, 10 rollers, up to 54 ml/min - 106723291
Pump head DG12A, 12 channel, 6 rollers, up to 75 ml/min - 106723292
Pump head DG12B, 12 channel, 10 rollers, up to 54 ml/min - 106723310
Pump head YZ15A, 1 channel, 3 rollers, up to 2416 ml/min, hose 1.6 mm wall - 106723311
Pump head YZ25A, 1 channel, 3 rollers, up to 1856 ml/min, hose 2.4 mm wall
Accessories:
- 106723430
Foot switch for iFluid peristaltic pumps -
106723431
Control module RS485 - 106723432
Control module 0-10V - 106723433
Control module 4-20 mA
-
- Luokittelu: Landgraf HLL
- Artikkelinumero: 106723142
- Kategoria: Peristalttiset pumput
Show all Peristalttiset pumput from Landgraf HLL - voimassa oloaika: 31.03.2027
- Viime päivitys: 31.03.2026
Alternative articles:
- 106723132
Peristaltic pump iPump2S, drive variable up to 200 rpm