Peristaltic pump iPump4L, flow rates up to 1223 ml/min

Kuva voi poiketa alkuperäisestä

 

The iPump4L peristaltic pump is built for filling operations with calibratable flow rates. The drive can be combined with different pump heads for up to 2 channels. The motor can be adjusted in the range of 0.1 up to 400 RPM speed. Depending on the pump head and tubing, flow rates of 0.0001-1710 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The set values can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.

The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The ABS housing is easy to clean and provides IP 31 protection for the unit.

Flow rate: 0.0001- 1710 ml/min
Accuracy: 0,5%
Speed: 0.1-400 RPM
Accuracy: 1 UPM
Pump direction: Forward, Reverse
Time control: 0.1s-99 h
Display: Graphic, two lines
Control: Menu-driven
Interface: RS-485 External signals: Start/stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 202×160×239 mm (d*w*h)

Scope of delivery:
Pump drive without head