Peristaltic pump iPump6S-Y, flow rates up to 12000 ml/min

Kuva voi poiketa alkuperäisestä

 

The iPump6S-Y peristaltic pump is built for high volume pumping in harsh environments. The drive can be combined with different pump heads for up to 2 channels. The motor can be adjusted in the range of 40 up to 600 RPM speed. Depending on the pump head and tubing, flow rates of 600-12000 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The setpoints can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.

The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The stainless steel housing is easy to clean and offers IP 54 protection against dust and splash water.

Flow rate: 600- 12000 ml/min
Accuracy: 0.5%.
Speed: 40-600 UPM
Accuracy: 1 UPM
Pump direction: Forward, Reverse
Time control: 0,1s-99 h
Interface: RS-485 External signals: Start/Stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH

Scope of delivery:
Pump drive without head