Exhaust air condensate cooler for microwave MW5000
Kuva voi poiketa alkuperäisestä
CURRENTLY NOT AVAILABLE.
The exhaust air condensate cooler is used to retain moisture in the exhaust air. It is a coil cooler with multiple temperature control coils. Depending on the temperature of the cooling medium and the humidity of the exhaust air, a retention rate of 50-70 % can be assumed.
The cooler has hose connections for operating water, waste water and condensate. For temperature control, we recommend a circulating cooler with high cooling capacity. The exhaust air condensation cooler is connected to the exhaust air spigot with a DN50 flange.
lisää The exhaust air condensate cooler is used to retain moisture in the exhaust air. It is a coil cooler with multiple temperature control coils. Depending on the temperature of the cooling medium and the humidity of the exhaust air, a retention rate of 50-70 % can be assumed.
The cooler has hose connections for operating water, waste water and condensate. For temperature control, we recommend a circulating cooler with high cooling capacity. The exhaust air condensation cooler is connected to the exhaust air spigot with a DN50 flange.
| (-) Compliance information: | |
|---|---|
| WEEE obligation: | Ei |
-
- Luokittelu: Landgraf HLL
- Artikkelinumero: 416773121
- Kategoria: Muut laboratoriovälineet
Show all Muut laboratoriovälineet from Landgraf HLL - voimassa oloaika: 31.03.2027
- Viime päivitys: 31.03.2026