SONOREX DE 510 Positioning lid
For the testing of an ultrasonic cleaner, a foil test (aluminium foil test) according to IEC 886 is recommended at the initial start-up and after an appropriate period of operation regularly (e.g. ¼ annually). The effect of ultrasonic baths is determined by the intensity and the distribution of the cavitation typical for the process in the ultrasonic bath. The foil test is a simple method for displaying the intensity and distribution of cavitation in an ultrasonic cleaner. For this purpose, an inserted aluminium foil is perforated or destroyed to a certain degree by cavitation, depending on the duration.
The foils can be archived in a suitable way (scanning, photo, etc.). The comparison of the foils is thus possible at any time. The perforated or perforated surfaces of the foils should have approximately the same extension and distribution - they are never congruent. Only by means of regular film tests is it possible to check the process, e.g. during the reprocessing of medical devices.
The selection of the film depends on the size of the ultrasonic cleaner. The wire frames are designed for a wide range of bath dimensions. Aluminium household foil is additionally required for the test procedure, this is not included in the scope of delivery. Internal dimensions l × w × d: 160 x 200 x mm
lisää The foils can be archived in a suitable way (scanning, photo, etc.). The comparison of the foils is thus possible at any time. The perforated or perforated surfaces of the foils should have approximately the same extension and distribution - they are never congruent. Only by means of regular film tests is it possible to check the process, e.g. during the reprocessing of medical devices.
The selection of the film depends on the size of the ultrasonic cleaner. The wire frames are designed for a wide range of bath dimensions. Aluminium household foil is additionally required for the test procedure, this is not included in the scope of delivery. Internal dimensions l × w × d: 160 x 200 x mm
| (-) Compliance information: | |
|---|---|
| WEEE obligation: | Ei |
| WEEE brand according to EAR register: | BANDELIN |
Accessory of:
- 301
SONOREX SUPER RK 100 Ultrasonic bath, Capacity/Volume: 3,0 liters - 303
SONOREX SUPER RK 102 H Ultrasonic bath with heating, Capacity/Volume: 3,0 liters - 306
SONOREX SUPER RK 106 Ultrasonic bath, Capacity/Volume: 5,6 liters - 312
SONOREX SUPER RK 100 H Ultrasonic bath with heating, Capacity/Volume: 3,0 liters - 316
SONOREX SUPER RK 255 H Ultrasonic bath with heating, Capacity/Volume: 5,5 liters - 326
SONOREX SUPER RK 103 H Ultrasonic bath with heating, Capacity/Volume: 4,0 liters - 3066
SONOREX SUPER RK 255 Ultrasonic bath, Capacity/Volume: 5,5 liters - 3201
SONOREX DIGITEC DT 103 H Ultrasonic bath with heating, Capacity/Volume: 4,0 lite - 3210
SONOREX DIGITEC DT 100 Ultrasonic bath, Capacity/Volume: 3,0 liters - 3215
SONOREX DIGITEC DT 255 Ultrasonic bath, Capacity/Volume: 5,5 liters - 3230
SONOREX DIGITEC DT 100 H Ultrasonic bath with heating, Capacity/Volume: 3,0 lite - 3235
SONOREX DIGITEC DT 102 H Ultrasonic bath with heating, Capacity/Volume: 3,0 lite - 3240
SONOREX DIGITEC DT 255 H Ultrasonic bath with heating, Capacity/Volume: 5,5 lite - 3270
SONOREX DIGITEC DT 106 Ultrasonic bath, Capacity/Volume: 5,6 liters
-
- Luokittelu: Bandelin
- Artikkelinumero: 3074
- Kategoria: Lisätarvikkeet ultraäänipesureille
Show all Lisätarvikkeet ultraäänipesureille from Bandelin - voimassa oloaika: 31.12.2026
- Viime päivitys: 06.08.2026