CO2-Incubator ICO150med, 156l, 18-50°C, CO2 control 0-20%

CO2-Incubator ICO150med, 156l, 18-50°C, CO2 control 0-20%
Kuva voi poiketa alkuperäisestä
 
Tuotenumero.: 102609150 Hinta pyydettäessä for 1 kappale
CO2 Incubator ICO150med, medical device, TwinDISPLAY, 156 l, working-temperature range 5 °C above ambient temperature to 50 °C, setting range 18 °C to 50 °C, with CO2 control - with dual beam NDIR system - adjustable from 0 % - 20 %, humidity limitation by a Peltier element, when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2,5 %, electronic microprocessor temperature controller with Pt100 and auto-diagnostic system, fully insolated stainless steel door and heated inner glass door, all-round heating on 6 sides, stainless steel housing and interior; with 1 water dish, with 2 stainless steel shelves; multiple overtemperature protection/undertemperature alarm, standard sterilisation programme; works calibration certificate at +37 °C, 5 % CO2; textured stainless steel exterior: 719 x 1070 x 591 mm; stainless steel interior: 560 x 700 x 400 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 1500 W
lisää
(-) Tekninen tieto:
Nimellinen tilavuus: 156 l
Minimi toimintolämpötila: 25 °C
Maksimi toimintolämpötila: 50 °C

Options:

  • ICO150medB04714
    External measuring instrument with additional measuring head for temperature and
  • ICO150medB33170
    USB User-ID stick (with User-ID licence): Oven-linked authorisation licence (Use
  • ICO150medB33505
    Subframe (622 mm high) adjustable in height (sizes 150/240: should not be used f
  • ICO150medB33508
    Subframe (130 mm high); sizes 150/240: only in combination with the correspondin
  • ICO150medB38737
    Water dish
  • ICO150medB39698
    3 HEPA14-filters (B49800) for chamber according to EN 1822, packed in sterile co
  • ICO150medB42114
    Stacking set (consisting of stacking corners, one connecting plate for the rear,
  • ICO150medB49800
    HEPA14-filter for chamber according to EN 1822, packed in sterile condition, inc
  • ICO150medD00124
    IQ/OQ/PQ checklist
  • ICO150medD38897
    IQ/OQ document incl. empty chamber distribution measurement according to DIN 128
  • ICO150medDLQ103
    IQ/OQ qualification incl. empty chamber distribution measurement according to DI
  • ICO150medDLQ103A
    IQ/OQ qualification - additional temperature, humidity and CO2 value - freely se
  • ICO150medDLQ105
    IQ/OQ qualification incl. empty chamber distribution measurement according to DI
  • ICO150medDLQ105A
    IQ/OQ qualification - additional temperature, humidity, CO2 and O2 value - freel
  • ICO150medDLQ200
    PQ qualification; incl. documentation
  • ICO150medE02087
    CO2 pressure reducing valve to DIN 8546, incl. gas cylinder monitor
  • ICO150medE06162
    N2 pressure reducing valve to DIN EN ISO 2503, incl. gas cylinder monitor (requi
  • ICO150medE06189
    Ethernet connection cable 5 m for computer interface
  • ICO150medE06192
    USB-Ethernet adapter
  • ICO150medE37418
    Perforated stainless steel shelf
  • ICO150medE48847
    DAkkS calibration according to method C (DKD-R 5-7) - temperature and humidity v
  • ICO150medE48848
    DAkkS calibration according to method C/A (DKD-R 5-7) - additional temperature a
  • ICO150medFDAQ1
    Software conforming to FDA AtmoCONTROL. Meets the requirements for the use of el
  • ICO150medFDAQ2
    Integration of additional units (up to max. 31 units) into an already existent F
  • ICO150medGA3Q5
    Guarantee extension by 1 year - ICO: all sizes
  • ICO150medK4
    Heated inner door with partitioned glass doors; size105/150/240 has 2/3/4 partit
  • ICO150medK6
    Capacitive humidity sensor for measuring and displaying the relative humidity
  • ICO150medK7
    Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh),
  • ICO150medS00211
    Calibration - temperature, humidity and CO2 value - freely selectable
  • ICO150medS00217
    Calibration - additional temperature, humidity and CO2 value - freely selectable
  • ICO150medS00312
    Maintenance on site; for appliances with active humidity control (option K7)
  • ICO150medS00312J
    Maintenance on site (maintenance contract); for appliances with active humidity
  • ICO150medS00323
    Maintenance on site; for appliances with passive humidity control
  • ICO150medS00323J
    Maintenance on site (maintenance contract); for appliances with passive humidity
  • ICO150medT2
    Electropolished interior
  • ICO150medT6
    Control of oxygen concentration by N2 inlet; adjustment range 1 % up to 20 % O2
  • ICO150medX2
    Voltage 115 V, 50/60 Hz
  • ICO150medZWVR6
    Central water supply, with filter cartridges for connection to the domestic wate
  • ICO150medZWVR7
    Central water supply, without filter cartridges for connection to the domestic w