Digital Conductivity Meter PCE-COM 20-ICA
Dangerous good (shipping)
PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper.
Featuring an operating frequency of 60 kHz, the conductivity meter has a large measuring range of 0.51 ... 112% IACS with an accuracy of +/- 0.5% at 20°C / 68°F. Thanks to a resolution of up to 0.01% IACS, automatic temperature compensation (ATC) and lift-off compensation (up to 500 ?m), the device ensures quick, easy, accurate and reproducible measurements of coated or corroded pieces during changing ambient conditions.
Measurement of the electrical conductivity of non-ferrous metals, such as aluminum, copper, titanium, magnesium or bronze, is necessary in applications involving electrical conductors and the characterization of alloys. Typical application areas are the assessment of strength differences in heat-treated or hardened materials, the authenticity testing of coin alloys, the verification of alloy inhomogeneities in critical components and the sorting of materials.
The conductivity meter is powered by an internal battery that can be charged via the interface on the bottom of the unit. In addition to the connection for the charging adapter, there is a USB interface allowing for the transfer of measurement data to a PC for more detailed analysis.
lisää Featuring an operating frequency of 60 kHz, the conductivity meter has a large measuring range of 0.51 ... 112% IACS with an accuracy of +/- 0.5% at 20°C / 68°F. Thanks to a resolution of up to 0.01% IACS, automatic temperature compensation (ATC) and lift-off compensation (up to 500 ?m), the device ensures quick, easy, accurate and reproducible measurements of coated or corroded pieces during changing ambient conditions.
Measurement of the electrical conductivity of non-ferrous metals, such as aluminum, copper, titanium, magnesium or bronze, is necessary in applications involving electrical conductors and the characterization of alloys. Typical application areas are the assessment of strength differences in heat-treated or hardened materials, the authenticity testing of coin alloys, the verification of alloy inhomogeneities in critical components and the sorting of materials.
The conductivity meter is powered by an internal battery that can be charged via the interface on the bottom of the unit. In addition to the connection for the charging adapter, there is a USB interface allowing for the transfer of measurement data to a PC for more detailed analysis.
| (-) Tekninen tieto: | |
|---|---|
| Pituus: | 220 mm |
| Käyttäjän näkymä: | LCD-näyttö |
| Maksimi toimintolämpötila: | 50 °C |
| Parametrit: | MYD448 |
| Paristotoiminen: | Ei |
| Virtalähde: | 240 V AC |
| Width: | 95 mm |
| Korkeus: | 35 mm |
| EAN koodi: | 4250348725288 |
| EAN koodi: | 4250348725288 |
| Memory data points: | 500 Datensätze |
| AC power plug: | Europlug (type C) |
| Kannettava mittalaite: | Ei |
| Kalibroitu ja sertifioitu: | Kyllä |
| (-) Turvaluokitettu tieto: | |
|---|---|
| UN-numero: | 38,3 |
| UN-numero: | 38,3 |
| (-) Compliance information: | |
|---|---|
| WEEE obligation: | Kyllä |
| WEEE obligation: | Kyllä |
| WEEE registration number: | DE69278128 |
| WEEE registration number: | DE69278128 |
| WEEE brand according to EAR register: | PCE |
| WEEE brand according to EAR register: | PCE |
| WEEE type of equipment: | Small equipment, that can be used in private households |
| WEEE type of equipment: | Small equipment, that can be used in private households |
-
- Luokittelu: PCE Instruments
- Artikkelinumero: PCE-COM 20-ICA
- Kategoria: Muut laboratoriovälineet
Show all Muut laboratoriovälineet from PCE Instruments - voimassa oloaika: 31.12.2026
- Viime päivitys: 16.02.2026