Windspeedmeter with Datalogger 230V PCE-WSAC 50+ 230

Kuva voi poiketa alkuperäisestä

 

The wind speed meter with cable and data logger 230V can be used in various fields of application. In use, the wind speed meter with cable and data logger 230 V starts measuring even the slightest wind movements. On the one hand, the wind speed meter can be used to monitor the current wind speed. On the other hand, it is also possible to use the wind speed meter with cable and data logger 230 V to measure average values for the last two or five minutes. If the wind speed values are higher than the pre-set values, a pre-alarm is activated before the alarm is triggered. Both alarms are emitted visually and audibly on the wind speed meter with cable and data logger 230V. If the pre-alarm is activated, a yellow LED will flash on the front of the device and a beeper will emit a periodic warning tone. If the regular alarm needs to be activated, the red LED will flash and the device will beep continuously.

In general, the wind speed meter is used wherever wind monitoring is required. This is often the case in factories, mines, wind turbines and the like. If required, a relay can also be connected to the wind speed meter with cable and data logger 230V. In addition to the low wind speeds, the wind speed meter is characterised by its high reliability and high accuracy.