Bioreactor 5 l MyFerm
Kuva voi poiketa alkuperäisestä
Glass reactor with a volume of 5 litres e.g. for incubating microorganisms and cells.
Consisting of chemically resistant borosilicate glass with highest durability.
All parts in contact with the medium are made of glass or PTFE/PP.
The bioreactor is completely autoclavable at 121°C.
The temperature control of the medium is achieved via the available temperature control coil in conjunction with an external circulation thermostat.
To ensure optimal mixing with the aid of a magnetic stirrer, 3 baffles are incorporated into the glass reactor.
In addition to feeding, the feedthroughs can be used for the following purposes, for example:
- Gassing
- Exhaust air filtration using external PTFE filters
- Sampling and reactor emptying
- process monitoring
Dimensions:
Nominal volume: approx. 5 L
Height: approx. 360 mm
Diameter: 190mm
The bioreactor is to be assembled in the configuration principle!
lisää Consisting of chemically resistant borosilicate glass with highest durability.
All parts in contact with the medium are made of glass or PTFE/PP.
The bioreactor is completely autoclavable at 121°C.
The temperature control of the medium is achieved via the available temperature control coil in conjunction with an external circulation thermostat.
To ensure optimal mixing with the aid of a magnetic stirrer, 3 baffles are incorporated into the glass reactor.
In addition to feeding, the feedthroughs can be used for the following purposes, for example:
- Gassing
- Exhaust air filtration using external PTFE filters
- Sampling and reactor emptying
- process monitoring
Dimensions:
Nominal volume: approx. 5 L
Height: approx. 360 mm
Diameter: 190mm
The bioreactor is to be assembled in the configuration principle!
| (-) Tekninen tieto: | |
|---|---|
| Nimellinen tilavuus: | 5 l |
| (-) Compliance information: | |
|---|---|
| WEEE obligation: | Ei |
Accessories:
- L14023005
Fermentation vessel for bioreactor MyFerm III - 5 l - L14023203
Magnetic stirrer for bioreactor MyFerm III - 2l to 5 l volume - L1402442
Heat exchanger without stirring bushing for bioreactors MyFerm III 2-5 litres - 886710040
Thermostat with 2 l bath volume, MyFerm -
886710040K
Cold-heat bath thermostat, volume: 4.5l, MyFerm - 886710056
Temperature control unit for bioreactor MyFerm
Options:
- 106723182
Peristaltic pump iPump2F, flow rates up to 700 ml/min, dosing capacity - L14020922
Temperature sensor Pt-100 for MyFerm 2l - L14023106
Aeration filter cartridge 150 ym for aeration of cultures, MY Ferm 2/5 l - L14023110
Exhaust air filter/ ventilation filter with GL 18 connection for bioreactors MyFerm - L14023122
Lifting tube for sampling bioreactor MyFerm 5l
-
- Luokittelu: Landgraf HLL
- Artikkelinumero: 886720005
- Kataloginumero: 886720005
- Kategoria: Reaktorit
Show all Reaktorit from Landgraf HLL - voimassa oloaika: 31.03.2027
- Viime päivitys: 31.03.2026
Alternative articles:
- 886720002
Bioreactor 2 l MyFerm - 886720010
Bioreactor 10 l MyFerm - 886720015
Bioreactor 15 l all-glass reactor Glass reactor for incubation of microorganisms and cells made from chemically resistant borosilicate glass with highest durability. All parts in contact with the media are made of glass or PTFE/PP. The bioreactor is completely autoclavable at 121°C. Integrated connections in the lid closure made of PTFE. Gas supply via gas supply tube with 200 ym filter cartridge. Exhaust air filtration via external PTFE filter. Sampling and reactor emptying via siphon tube. Connection for electronic temperature sensor. Standard reactor connections included: 3 *passages for sensors ( Ph, conductivity) or media additives (foaming agent, acid, alkali etc.). 1 *large inoculation nozzle. 1 *basic set of feed-through and screwed sealing connections. The culture is mixed with a heated magnetic stirrer.(not included). Baffles integrated into the walls prevent the liquid as a whole from rotating evenly. Dimensions: Volume to shoulder height approx.15 L Height approx. 470 mm Diameter 270 mm - 886720020
Bioreactor MyFerm 20 l


