Bioreactor MyFerm 20 l
Kuva voi poiketa alkuperäisestä
- (Klikkaa tästä jos haluat lisätietoja)
-
-
Glass reactor with a volume of 20 litres, e.g. for incubating microorganisms and cells, made of chemically resistant Clean Save laboratory glass.
All wetted parts are made of glass or PTFE/PP.
The bioreactor is completely autoclavable at 121°C.
The temperature control of the medium is achieved via the available temperature control coil in conjunction with an external circulation thermostat.
To ensure optimal mixing with the aid of a magnetic stirrer, 3 baffles are incorporated into the glass reactor.
In addition to feeding, the feedthroughs can be used for the following purposes, for example:
- Gassing
- Exhaust air filtration using external PTFE filters
- Sampling and reactor emptying
- process monitoring
Dimensions:
Volume up to shoulder height: approx. 20 L
Height: approx. 550 mm
Diameter: 290 mm
The bioreactor is to be assembled in the configuration principle!
lisää All wetted parts are made of glass or PTFE/PP.
The bioreactor is completely autoclavable at 121°C.
The temperature control of the medium is achieved via the available temperature control coil in conjunction with an external circulation thermostat.
To ensure optimal mixing with the aid of a magnetic stirrer, 3 baffles are incorporated into the glass reactor.
In addition to feeding, the feedthroughs can be used for the following purposes, for example:
- Gassing
- Exhaust air filtration using external PTFE filters
- Sampling and reactor emptying
- process monitoring
Dimensions:
Volume up to shoulder height: approx. 20 L
Height: approx. 550 mm
Diameter: 290 mm
The bioreactor is to be assembled in the configuration principle!
| (-) Tekninen tieto: | |
|---|---|
| Nimellinen tilavuus: | 20 l |
| (-) Compliance information: | |
|---|---|
| WEEE obligation: | Ei |
Accessories:
- L14023020
Fermentation vessel for bioreactor MyFerm 20 l - L14023204
Magnetic stirrer for bioreactor MyFerm III 10 l to 20 l - L1402444
Heat exchanger without stirring bushing for bioreactors MyFerm III 15-20 litres - 886710040
Thermostat with 2 l bath volume, MyFerm -
886710040K
Cold-heat bath thermostat, volume: 4.5l, MyFerm - 886710056
Temperature control unit for bioreactor MyFerm
Options:
- 106723182
Peristaltic pump iPump2F, flow rates up to 700 ml/min, dosing capacity - 106723184
Peristaltic pump iPump4F, flow rates up to 1710 ml/min, dosing capability - L14020924
Temperature sensor Pt-100 for MyFerm 20 l Lemo plug - L14023107
Aeration filter cartridge 150 ym for aeration of cultures, MyFerm 10/15/20 l - L14023110
Exhaust air filter/ ventilation filter with GL 18 connection for bioreactors MyFerm - L14023125
Lifting tube for sampling bioreactor MyFerm 20l
-
- Luokittelu: Landgraf HLL
- Artikkelinumero: 886720020
- Kataloginumero: 886720020
- Kategoria: Reaktorit
Show all Reaktorit from Landgraf HLL - voimassa oloaika: 31.03.2027
- Viime päivitys: 31.03.2026
Alternative articles:
- 886720002
Bioreactor 2 l MyFerm - 886720005
Bioreactor 5 l MyFerm - 886720010
Bioreactor 10 l MyFerm - 886720015
Bioreactor 15 l all-glass reactor Glass reactor for incubation of microorganisms and cells made from chemically resistant borosilicate glass with highest durability. All parts in contact with the media are made of glass or PTFE/PP. The bioreactor is completely autoclavable at 121°C. Integrated connections in the lid closure made of PTFE. Gas supply via gas supply tube with 200 ym filter cartridge. Exhaust air filtration via external PTFE filter. Sampling and reactor emptying via siphon tube. Connection for electronic temperature sensor. Standard reactor connections included: 3 *passages for sensors ( Ph, conductivity) or media additives (foaming agent, acid, alkali etc.). 1 *large inoculation nozzle. 1 *basic set of feed-through and screwed sealing connections. The culture is mixed with a heated magnetic stirrer.(not included). Baffles integrated into the walls prevent the liquid as a whole from rotating evenly. Dimensions: Volume to shoulder height approx.15 L Height approx. 470 mm Diameter 270 mm