Peristaltic pump iPump2F, flow rates up to 700 ml/min, dosing capacity

Peristaltic pump iPump2F, flow rates up to 700 ml/min, dosing capacity
Kuva voi poiketa alkuperäisestä
Kirjallisuus: (-)
  • (Klikkaa tästä jos haluat lisätietoja)
  • pdf_preview
 
Tuotenumero.: 106723182 Hinta pyydettäessä for 1 kappale lisätään ALV (25.5%) Toimituskulut

The iPump2F peristaltic pump was built for dosing tasks. The drive can be combined with different pump heads for up to 10 channels. The motor speed can be adjusted in the range from 0.1 up to 200 rpm. Depending on the pump head and tubing, flow rates of 0.0001-825 ml/min are possible with this pump. In addition to the pump speed, the running time of the pump can also be adjusted. The setpoints can be adjusted via a membrane keypad, via the RS485 interface or via the analogue interface. The hose line can be filled quickly via a prime button.

The current number of revolutions is shown in an easy-to-read LED display. The last set parameters are saved by the pump even when it is switched off. The ABS housing is easy to clean and provides IP 31 protection for the unit.

Flow rate: 0.0001- 825 ml/min
Accuracy: 0,5%
Speed: 0.1-200 RPM
Accuracy: 1 UPM
Pump direction: Forward, Reverse
Dosing volume: 0.1 ml - 99.9 l
Repetitions: 1-999
Pause time: 1-999 s
Display: Graphic, two lines
Control: Menu-driven
Interface: RS-485 External signals: Start/Stop, speed 0-5V, 0-10V, 4-20 mA, 0-10kHz
Ambient temperature: 0-40°C
Humidity: <80% RH
Size: 202×160×239 mm (d*w*h)

Scope of delivery:
Pump drive without head
lisää
(-) Tekninen tieto:
Maksimi pumpattavatilavuus: 700 ml/min
Maximum rotation speed: 200 upm
Virtalähde: 230 V AC
Ulostulosignaalin tyyppi: analoginen
Ulostulosignaalin tyyppi: RS 485
(-) Compliance information:
WEEE obligation: Kyllä
WEEE registration number: DE87387371
WEEE brand according to EAR register: HLL
WEEE type of equipment: Small equipment for use in other than private households only

Necessary choosen article:

  • 106723211
    Pump head DG1A, 1 channel, 6 rollers, up to 75 ml/min
  • 106723212
    Pump head DG1B, 1 channel, 10 rollers, up to 54 ml/min
  • 106723221
    Pump head DG2A, 2 channel, 6 rollers, up to 75 ml/min
  • 106723222
    Pump head DG2B, 2 channel, 10 rollers, up to 54 ml/min
  • 106723241
    Pump head DG4A, 4 channel, 6 rollers, up to 75 ml/min
  • 106723242
    Pump head DG4B, 4 channel, 10 rollers, up to 54 ml/min
  • 106723261
    Pump head DG6A, 6 channel, 6 rollers, up to 75 ml/min
  • 106723262
    Pump head DG6B, 6 channel, 10 rollers, up to 54 ml/min
  • 106723310
    Pump head YZ15A, 1 channel, 3 rollers, up to 2416 ml/min, hose 1.6 mm wall
  • 106723311
    Pump head YZ25A, 1 channel, 3 rollers, up to 1856 ml/min, hose 2.4 mm wall

 

Accessories:

  • 106723261
    Pump head DG6A, 6 channel, 6 rollers, up to 75 ml/min
  • 106723262
    Pump head DG6B, 6 channel, 10 rollers, up to 54 ml/min
  • 106723430
    Foot switch for iFluid peristaltic pumps
  • 106723431
    Control module RS485
  • 106723432
    Control module 0-10V
  • 106723433
    Control module 4-20 mA

 

Accessory of:

  • L14023122
    Lifting tube for sampling bioreactor MyFerm 5l
  • L14023123
    Lifting tube for sampling bioreactor MyFerm 10l
  • L14023125
    Lifting tube for sampling bioreactor MyFerm 20l

 

Option of: